Building Optimization Broker
Building Optimization Broker
Breadcrumbs

Setting a Static IP Address

This optional step allows you to configure static IP addresses or change local configuration settings. It may not be required for most installations.

  1. View available Wi-Fi networks on your computer.

  2. Connect to your Agent's Wi-Fi network. Your Agent's Wi-Fi network is K2A-##### (the last 5 digits of your Agent's serial number).

  3. Enter the Wi-Fi password. (Please contact WennSoft Support for the password.)

  4. Once connected to your Agent's Wi-Fi network, open a web browser and navigate to https://192.168.7.1:57000
     to access the on-board UI. Connecting to the onboard UI will only allow https connection. If you are unable to connect, please ensure that you are connecting to  https://192.168.7.1:57000

  5. Enter the admin credentials. (Please contact K2A Support for the login credentials.)

  6. On the BAS Agent dashboard, on the Agent Network Settings card, mark Static IP Address.

  7. Enter the IP Address and make any updates to the Subnet Mask, Gateway, and DNS Servers as required. If you need to input multiple DNS Servers, use a "space" to delineate.

  8. Select Save.